Ultrafiltration UF ECO

The ultrafiltration of the UF ECO family are designed, sized and built with procedures in strict quality regime. Membranes with hollow fibers in H-PVDF are used with service in the "Dead-end" version capable of removing suspended solids up to 0.03 microns from the fluid to be treated and removing any microbiological pollutants.

They are used in treatments and / or pre-treatments of primary, surface or ground water for purification purposes and in waste water for the purpose of reuse for civil, industrial or irrigation purposes. Depending on their intended use, their operation can be managed in semi-automatic, automatic, automatic mode with constant flow.

Semi-automatic version SA

The filtration phase stops automatically when a maximum operating pressure is reached and requires the intervention of an operator to carry out the washing phases.

Automatic version A

The filtration phase alternates with the washing steps in a timed cyclical manner managed by the PLC. Temporary forcing of the cycle after a period of inactivity in order to avoid premature deterioration of the membranes.

Automatic version with constant flow rate APC

The filtration phase guarantees a constant flow rate for the entire duration of the cycle and alternates with the washing steps in a timed cyclic manner managed by the PLC. Temporary forcing of the cycle after a period of inactivity in order to avoid premature deterioration of the membranes.

The technical performance data listed below should be considered as a mere reference. Ecosistemi Srl is structured to design and build machines that meet the particular needs of the applicant after carrying out field tests with a pilot machine to obtain the precise characteristics of the machine identified (including any pre and post-treatments).

& nbsp;

Standard equipment

SA - A - APC version

  • Bearing structure entirely made of AISI 304 steel - 50 m2 UF H-PVDF membranes
  • Water lines in plastic PN 16
  • Maximum filtration pressure switch
  • 2 Chemicals metering pumps
  • 3 level controls: raw water, backwash water, ultrafiltered water

SA version

  • Stainless steel pump for filtration and washing - Air compressor with regulator
  • Manual valves in plastic material PN 16
  • Glycerine-filled stainless steel pressure gauge
  • Flowmeter
  • Turbine flow meters
  • 2 Chemicals containers
  • Electromechanical "CE" control panel with resin case equipped with flow chart indicating: filtering dry running block, washing dry running block, maximum level block, high pressure block, thermal block; main switch, mains presence light, hour counter.

Version A - APC

  • Stainless steel filtration pump (version A)
  • Stainless steel filtration pump with inverter (APC version)
  • Stainless steel washing pump
  • Air compressor with filter-regulator and minimum pressure switch
  • Pneumatically actuated automatic valves and limit switch switches in plastic PN 16
  • Stainless steel glycerine bath gauges for ultrafiltration and washing
  • Ultrafiltered flowmeter and washing
  • Flow meter (version A)
  • Inverter control magnetic flow meter (APC version)
  • 2 chemical containers 120 liters graduated with level control
  • PLC "CE" control panel with resin case equipped with color touch screen display where the following are displayed: the operating status of filtration and washing step with the layout of the step in progress; the hours of work and the liters of ultrafiltrate produced; the following alarms of low air pressure, high filtration pressure, incorrect valve position, filtration pump thermal block, washing pump thermal block, air compressor thermal block, dry cleaning block, extraordinary washing due to maximum pressure switch intervention, general switch and presence light network.

Optional

  • 4 BIG filter / AISI 304 or 316 stainless steel multi-cartridge filter

  • Additional metering pumps

  • Alarm transmission system via GSM

  • Soft-start pump start

  • Double pump on the machine

  • GRP grating

  • HMI 10 ”touch screen

Product types